Fridge 12v control wiring (1997+)
Posted: Wed Jan 28, 2015 2:10 pm
Hi, all.
I have a 1999 B190. The fridge doesn't work on 12v, so I determined that there is no voltage on the yellow control wire at the fridge control relay behind the converter with the engine running. I traced the control wire from the relay back to a disconnected connector beneath the dash near the parking brake pedal (see photos). I can't find anything nearby to plug it into.
I've already confirmed that there is 12v on the fridge power line at the relay (the heavy black wire from the 12v panel through the circuit breaker). I also tested the relay itself and it works fine. I've also checked the continuity of the green and white wires from the relay to the fridge itself.
Does anyone know where that connector should be plugged in? Can anyone with a 1997 or later model take a look to see how theirs is set up?
Thanks!
I have a 1999 B190. The fridge doesn't work on 12v, so I determined that there is no voltage on the yellow control wire at the fridge control relay behind the converter with the engine running. I traced the control wire from the relay back to a disconnected connector beneath the dash near the parking brake pedal (see photos). I can't find anything nearby to plug it into.
I've already confirmed that there is 12v on the fridge power line at the relay (the heavy black wire from the 12v panel through the circuit breaker). I also tested the relay itself and it works fine. I've also checked the continuity of the green and white wires from the relay to the fridge itself.
Does anyone know where that connector should be plugged in? Can anyone with a 1997 or later model take a look to see how theirs is set up?
Thanks!